Excavations and support systems
Review of excavation support condition, sequence, restraints and readiness before loading or further dig.
Inspections
Temporary Works Site Inspections
Independent, practical site inspections with clear photographic reporting, priority actions and experienced temporary works judgement.
Independent review when temporary works are live on site
Temporary works can change between design, installation, use and removal. Our site inspections review the available design information and records alongside the physical works and current site conditions.
The purpose is to identify concerns early, provide a clear record of what was observed and help the project team prioritise corrective action. The inspection scope is agreed before the visit so that the report is proportionate to the project and the client’s requirements.
Site examples
Typical inspection examples
Inspections can cover a wide range of temporary works. Scope and competency requirements are confirmed for each assignment.
Falsework and backpropping
Checks on falsework and backpropping arrangements against design intent, loading stage and visible condition.
Working platforms
Assessment of platform condition, edge protection interfaces and suitability for intended plant or people loading.
Crane and plant support
Inspection of crane and plant support arrangements, ground conditions and interfaces with surrounding temporary works.
Façade retention
Review of façade retention systems, connections, restraints and signs of movement or unauthorised change.
Temporary stability and edge protection
Checks on temporary stability measures and edge protection interfaces that affect safe use of the works.
Access structures and loading platforms
Inspection of access structures and loading platforms for condition, capacity interfaces and site controls.
Hoarding and gates
Condition and safety review of hoarding, gates and related temporary perimeter works.
Inspection process
How Our Temporary Works Inspection Works
A structured inspection process to verify temporary works condition, identify risks and provide clear actions for maintaining safe and compliant operations.
Installed temporary works and visible condition
Alignment with available drawings, design notes and agreed sequence
Supports, restraints, foundations, connections, access and interfaces
Changes, damage, movement, deterioration or unauthorised modification
Permit, inspection and handover status where applicable
Housekeeping, access, exclusion and immediate site controls affecting the temporary works
Relevant register entries and supporting records
Evidence of inspection, maintenance and close-out actions
Professional clarification
Our inspections provide an independent review based on the agreed scope, available information and visible site conditions at the time of inspection.
They support, but do not replace, the responsibilities of the appointed project team, designer, design checker, Temporary Works Co-ordinator (TWC) or Temporary Works Supervisor (TWS).
Where design verification, opening-up, testing or monitoring is required, these will be identified separately as an additional action or service.
Frequently asked questions
What does a temporary works inspection cover?
The agreed scope typically covers installed temporary works and visible condition; alignment with available drawings, design notes and agreed sequence; supports, restraints, foundations, connections, access and interfaces; changes, damage, movement, deterioration or unauthorised modification; permit, inspection and handover status; housekeeping, access, exclusion and immediate site controls; relevant register entries and supporting records; and evidence of inspection, maintenance and close-out actions. Scope is confirmed before the visit so the report matches the project and your requirements.
What will we receive after the visit?
Clients receive a photographic report organised by item or location, with observations, priorities, recommended actions and named responsibilities where agreed. Urgent concerns are raised promptly so the site team can act without waiting for the final report.
What information should we provide before the inspection?
Site location, required date, available temporary works register, relevant drawings or design notes, and a short description of the works to be reviewed. Photographs of current conditions are useful where available.
How quickly can an inspection be arranged?
Availability depends on location, scope and existing commitments. One-off visits and planned programmes can both be arranged. Send the site details and preferred date and we will confirm the earliest suitable slot and fee.
Does an inspection replace the TWC or designer’s responsibilities?
No. An inspection is based on the agreed scope, information made available and conditions visible at the time of the visit. It does not replace the appointed project team, designer, design checker, Temporary Works Co-ordinator (TWC) or Temporary Works Supervisor (TWS).
Can you reinspect after corrective works?
Yes. Follow-up review or reinspection can be included where useful, for example after high-priority actions, weather events, alterations or before a client assurance review.
Book a Temporary Works Inspection
Send the site location, required date, available register, drawings and a short description of the temporary works. We will confirm the inspection scope and fee.
Need a readiness checklist first? See information required before an inspection, or contact us to book a site visit.